2021 BMC TIMEMACHINE 01 TRI ROAD FRAMESET

  • Share on social media

BMC’s timemachine is such a fast performer, BMC needed four years to find a way to improve it. The new timemachine 01 is faster with no wind, faster in crosswinds, and easier to fit. In addition, if you need to carry stuff on the bike, there’s more room for it with less aerodynamic penalty. And the frame is UCI-legal across their size run.

The old timemachine had impressive straight line aerodynamics. The new timemachine improves on straight line aerodynamics, real world aerodynamics, and crosswind aerodynamics. The subA tube shapes have been further refined. Many profiles have been truncated, which doesn’t cost you at all in a headwind, better shrouds water bottles and gear, and is less susceptible to side-forces when riding in crosswinds. Added stability means you spend less time fighting your bike and more time laying out the watts. Shrouding water bottles is no small deal, as you need to carry water, and most wind tunnel tests do not account for this. With cage mounts on the seat tube and three bolts on the downtube, you can choose how you want your hydration. The downtube yields two positions for bottles, the lower is more aero, but if you have trouble reaching low, or want to run two bottles, use the upper position. The tube shaping makes the most dramatic improvements with round bottles, but aero bottles benefit as well.

In addition, the integrated bar/stem combo is faster. They actually have two different combinations sitting atop the improved bayonet fork. A raised V-cockpit that comes standard with complete bikes and is better for less flexible riders. And a flat-cockpit, that can come on the frameset, or can be ordered separately for the complete bikes. With the V, the stack spacers have a range of 590-705mm in height. With the flat, the range is 530-670mm. And with the flat setup, the base bar can be flipped over, giving you a range of 40mm below the stem to 40mm above the stem.

In both cases, particularly in the raised cockpit setup, the arm supports channel air more cleanly, reducing drag. And there are a set of top tube mounts midway back on the top tube for boxes. This might look unusual, but it worked out to be faster in the wind tunnel, so BMC departed from tradition to give you speed.

The fork itself has widely-spaced legs, giving the air an easier time flowing past the legs and wide rims. Both the fork and rear triangle can work with rims up to 28mm wide and tires up to 27mm wide. And the horizontal rear dropouts have adjustable stops, so you can position the wheel as close to the frame as possible regardless of the tire width.

The final aero touch is the rear storage box. This is not UCI-legal, but it is for multi-sport riders. It’s big enough to fit a tubular plus tools and inflator. The box mounts behind the seat post when the forward mounting option is employed.

To offer the most fit options in their P2P, Position 2 Perform, system, the seat post has a rearward mount and a forward mount. In addition, the saddle clamp has four positions. This yields a huge range of adjustment, going from a virtual 71.5 to a virtual 80.8-degree seat angle, with 124mm of total fore-aft adjustment.

To get the maximum speed out of a frame, integration is essential. That’s why the fork has integrated brakes, and the rear brakes hide under the chain stays. But BMC wasn’t satisfied with their earlier efforts on this front. They developed a brake booster system, giving you more power at your fingertips for less effort. They also developed something they call the quick-pad cartridge system. This makes it easy for you to swap pads from your carbon-specific race pads to your aluminum training wheel pads. Pulling and replacing cartridges is as easy as swapping pads on conventional brakes.

BMC embraces options. They have Dual Transmission Integration here. You can run electronic or mechanical, even hydraulic shifting. However, the complexity of running mechanical is such that they only offer complete bikes with electronic shifting and recommend it when you’re building up your own steed. Likewise, they utilize the BB86 bottom bracket standard.

The BMC timemachine 01 makes it easier to go faster, both for how it allows you to find the perfect position and for how it slices through the air outside.

Town / City / village:Nairobi - Kenya
Creation Date12.07.2021
Ad number:16617
CategorySports & Entertainment
Keywords:Bicycle,RoadBike,MuntainBike,Frame

Send a message to user


  Other Ads from this advertiser

 Our recommendations and advices
In general we believe that all our announcer and services providers are genuine. But In order to avoid been fooled and for your own personal safety, always meet the seller in a public places or at least not in isolated places. It's probably a good idea if you bring a friend as well to witness the transaction

Other Ads from this advertiser More similar ads

2021 BMC TIMEMACHINE 01 TRI ROAD FRAMESET
2021 BMC TIMEMACHINE 01 TRI ROAD FRAMESET

BMC’s timemachine is such a fast performer, BMC needed four years to find a way to improve it. The new timemachine 01 is faster with no wind, faster in crosswinds, and easier to fit. In addition, if you need to carry stuff on the bike, there’s more room for it with less aerodynamic penalty. And the frame is UCI-legal across their size run. The old timemachine had impressive straight line aerodynamics. The new timemachine improves on straight line aerodynamics, real world aerodynamics, and crosswind aerodynamics. The subA tube shapes have been further refined. Many profiles have been truncated, which doesn’t cost you at all in a headwind, better shrouds water bottles and gear, and is less susceptible to side-forces when riding in crosswinds. Added stability means you spend less time fighting your bike and more time laying out the watts. Shrouding water bottles is no small deal, as you need to carry water, and most wind tunnel tests do not account for this. With cage mounts on the seat tube and three bolts on the downtube, you can choose how you want your hydration. The downtube yields two positions for bottles, the lower is more aero, but if you have trouble reaching low, or want to run two bottles, use the upper position. The tube shaping makes the most dramatic improvements with round bottles, but aero bottles benefit as well. In addition, the integrated bar/stem combo is faster. They actually have two different combinations sitting atop the improved bayonet fork. A raised V-cockpit that comes standard with complete bikes and is better for less flexible riders. And a flat-cockpit, that can come on the frameset, or can be ordered separately for the complete bikes. With the V, the stack spacers have a range of 590-705mm in height. With the flat, the range is 530-670mm. And with the flat setup, the base bar can be flipped over, giving you a range of 40mm below the stem to 40mm above the stem. In both cases, particularly in the raised cockpit setup, the arm supports channel air more cleanly, reducing drag. And there are a set of top tube mounts midway back on the top tube for boxes. This might look unusual, but it worked out to be faster in the wind tunnel, so BMC departed from tradition to give you speed. The fork itself has widely-spaced legs, giving the air an easier time flowing past the legs and wide rims. Both the fork and rear triangle can work with rims up to 28mm wide and tires up to 27mm wide. And the horizontal rear dropouts have adjustable stops, so you can position the wheel as close to the frame as possible regardless of the tire width. The final aero touch is the rear storage box. This is not UCI-legal, but it is for multi-sport riders. It’s big enough to fit a tubular plus tools and inflator. The box mounts behind the seat post when the forward mounting option is employed. To offer the most fit options in their P2P, Position 2 Perform, system, the seat post has a rearward mount and a forward mount. In addition, the saddle clamp has four positions. This yields a huge range of adjustment, going from a virtual 71.5 to a virtual 80.8-degree seat angle, with 124mm of total fore-aft adjustment. To get the maximum speed out of a frame, integration is essential. That’s why the fork has integrated brakes, and the rear brakes hide under the chain stays. But BMC wasn’t satisfied with their earlier efforts on this front. They developed a brake booster system, giving you more power at your fingertips for less effort. They also developed something they call the quick-pad cartridge system. This makes it easy for you to swap pads from your carbon-specific race pads to your aluminum training wheel pads. Pulling and replacing cartridges is as easy as swapping pads on conventional brakes. BMC embraces options. They have Dual Transmission Integration here. You can run electronic or mechanical, even hydraulic shifting. However, the complexity of running mechanical is such that they only offer complete bikes with electronic shifting and recommend it when you’re building up your own steed. Likewise, they utilize the BB86 bottom bracket standard. The BMC timemachine 01 makes it easier to go faster, both for how it allows you to find the perfect position and for how it slices through the air outside....

Bicycle RoadBike MuntainBike Frame 

2227 EUR

Nairobi
Kenya

12.07.2021

2021 BMC ROADMACHINE 01 FRAMESET
2021 BMC ROADMACHINE 01 FRAMESET

ROADMACHINE 01 FRAMESET SPECIFICATIONS Bottom Bracket Type PF86 Required Frame Material TCC 01 Premium Carbon, Angle Compliance Technology Fork Roadmachine 01 Premium Carbon, Integrated Cockpit Headset Integrated Seatpost Roadmachine 01 "D" Premium Carbon, 15mm offset Front Derailleur Type Braze-On Required Stem BMC ICS 01 - Integrated Cockpit Design ROADMACHINE 01 FRAMESET INFORMATION With the new Roadmachine 01, BMC is redefining what an endurance bike can be. It’s faster than a typical endurance bike, faster than BMC’s own Granfondo, something you see in stiffness and aerodynamics. At the same time, it offers greater comfort than a racing bike. The bike is only offered with disc brakes, making it easy to fit 30mm tires for off-roading. And the geometry reflects the desires of the engineers. It’s racy but stable, and the front end is adaptable, even with the integrated stem. They think of this as the one-bike collection. The stem is not only a looker, but shows how thoroughly BMC rethought the front end. The brake hoses run through the stem and into the frame without seeing daylight. The front brake hose comes out of the fork leg just above the flat mount. The rear hose goes into the downtube and out on the left chainstay. Hydraulic brakes only. If you’re running Shimano Di2, the wire runs internally and the battery in the seatpost. If you’re running mechanical shifting or hydraulic, the cabling goes around the head tube. Different covers are provided. And the stem sits atop what BMC is referring to as a cone. The standard has 2cm of stack and gives you a stack equivalent to their GF bikes. There’s a second low-stack cone, purchase separately, that has zero cm of rise. An extra 10mm spacer comes with the bike and stem, but any 1 1/8” round spacer will work. Stem lengths are 90mm for the 47 & 51, 100mm for the 54, 110mm for the 56, 120mm for the 58 and 61. The stem clamps to a standard round 31.8mm diameter handlebar. And BMC is working on integrated mounts for computers and cameras. As with any endurance bike, comfort and stiffness need to be baked in. Both layup and shaping play important roles. That’s why there’s the beefy 1 1/2” lower end of the tapered steerer and beefy fork crown atop slim fork legs. Likewise, at the back, the angle compliance seat stays attach low on the seat tube. The shaping here results in vertical compliance that is greater than the Teammachine but less than the Gran Fondo. The D-shaped seatpost, designed specifically for the Roadmachine, is carbon, and engineered for compliance as well. 15mm setback, btw. In terms of both bottom bracket stiffness and head tube stiffness, the Roadmachine sits between both bikes as well, stiffer than the GF and not as stiff as the Teammachine. You can see the work with the elongated head tube, the notch for the fork, and the massive bottom bracket juncture as well as chainstays that start off beefy and slim down, similar to the design of the fork blades. The BB standard is PF86, and atop it sits an integrated chain guide, designed to eliminate dropped chain. The geometry furthers the cause of a super-fast endurance bike. The chainstays are shorter than you’ll find on the GF. With the wheel better tucked underneath you, accelerations are easier. There’s 63mm of trail, a bit longer than a racing bike, but helps with stability. The bottom bracket drop is a generous 71mm, meaning you’ve got a low center of gravity, which makes both slow grinding climbs, and speedy descents easier. And with disc brakes, they’ve opened up tire selection. Up to 30mm in diameter will fit. As mentioned earlier, the frame is designed for hydraulic brakes only. You can run 160 or 140mm in front thanks to BMC’s proprietary mount. With the rear, you can mount a 140mm via direct mount and 160mm with flatmount adapter. The hubs roll on 12mm thru-axles, both front (100mm) and rear (142mm). The thru-axle design improves stiffness, drops weight, and makes wheel changes easier. The Roadmachine 01 is high-speed fun for those who want a fleet of one....

Bicycle RoadBike MuntainBike Frame 

1366 EUR

Nairobi
Kenya

12.07.2021

2021 CANNONDALE SCALPEL HM 1 MOUNTAIN BIKE
2021 CANNONDALE SCALPEL HM 1 MOUNTAIN BIKE

CANNONDALE SCALPEL HM 1 MOUNTAIN BIKE 2021 The Cannondale Scalpel HM 1 Mountain Bike will meet the needs of the most demanding cross country racers. It's incredibly light with agressive geometry and ground-breaking suspension technology, delivering punchy acceleration and unmatched traction so you can go faster, have more fun on the trails, and chase those podium positions. SPECIFICATION Frame Cannondale all-new, BallisTec Hi-Mod carbon, Proportional Response Tuned, FlexPivot chainstay, PF30-83, tapered headtube, Speed Release 12mm thru-axle, Ai Offset, Stash compatible Rear Shock Fox Float DPS Factory EVOL, 100mm travel, remote lockout, adjustable rebound Fork Cannondale Lefty Ocho Carbon, 100mm, Chamber Damper with remote lockout, OppO Spring System, tapered steerer, 55mm offset Headset Integrated, 1-1/8 to 1.5", sealed angular contact bearings Bottom Bracket Cannondale Alloy PressFit30 Stem Cannondale 1, 7075 Alloy, 1-1/8", 31.8, 7° Handlebar Cannondale 1 Flat, Carbon, 31.8mm, 9° back, 760mm Grips ESI Silicone 32mm Brakes Shimano XTR hydraulic disc, 160mm Ice Tech rotors Brake Levers Shimano XTR hydraulic disc Front Derailleur N/A Rear Derailleur Shimano XTR, Shadow Plus 12-speed Shift Levers Shimano XTR, 12-speed Cassette Shimano XT, 10-51, 12-speed Crankset Cannondale HollowGram, BB30a, OPI SpideRing, 34T, Ai offset Chain Shimano XT, 12-speed Front wheel Cannondale Lefty 60 hub / HollowGram 25, Superlight Hi-Impact carbon, 28-hole, 25mm IW, tubeless-ready rim / HollowGram 2.0/1.8/2.0 spokes Rear wheel DT Swiss, 12x148 hub / HollowGram 25, Superlight Hi-Impact carbon, 28-hole, 25mm IW, tubeless-ready rim / HollowGram 2.0/1.8/2.0 spokes Front Tyre Schwalbe Racing Ralph, 29 x 2.25", Snake Skin, Addix Speed Compound, tubeless-ready clincher Rear Tyre Schwalbe Racing Ralph, 29 x 2.25", Snake Skin, Addix Speed Compound, tubeless-ready clincher Saddle Prologo Dimension NDR, Tirox rails Seatpost ENVE Carbon, 31.6 x 400mm, 0mm offset Connectivity Cannondale Wheel Sensor Extras Stash Kit (Fabric 8 in 1 Mini Tool and Dynaplug tubeless puncture repair tool) ...

Bicycle RoadBike MuntainBike 

3369 EUR

Nairobi
Kenya

12.07.2021

2021 CANNONDALE SCALPEL CARBON SE 2 MOUNTAIN BIKE
2021 CANNONDALE SCALPEL CARBON SE 2 MOUNTAIN BIKE

CANNONDALE SCALPEL CARBON SE 2 MOUNTAIN BIKE 2021 Fast, precise, stable, the Cannondale Scalpel Carbon SE 2 Mountain Bike will excel, be that on fast technical singletrack or in marathon races. The incredibly light frame has been engineered with innovative FlexPivot suspension for the best possible traction and control, and both this and the RockShox fork, offer 120mm of plush travel so you'll roll faster and smoother over the harshest and rockiest of terrain. Using Proportional Response in the design, each frame size is fine-tuned to cater for every rider in the same way, so whether you're on the biggest or the smallest size, you'll reap the same benefits. SPECIFICATION Frame Cannondale all-new, 120mm travel, BallisTec carbon, Proportional Response Tuned, FlexPivot chainstay, PF30-83, tapered headtube, Speed Release 12mm thru-axle, Ai Offset, Stash compatible Rear Shock RockShox SIDLuxe Select+, 2-position mode adjust, adjustable rebound Fork RockShox SID Select, 120mm, Debonair, 15x110mm thru-axle, tapered steerer, 44mm offset Headset Integrated Sealed Bearing, tapered Bottom Bracket SRAM DUB PF30 MTB83 Stem Cannondale 3, 6061 Alloy, 31.8, 7° Handlebar Cannondale riser, butted 6061 Alloy, 31.8mm, 5° rise, 9° sweep, 760mm Grips ESI Silicone 32mm Front Brake Shimano MT500 hydraulic disc, 180mm RT54 rotor Rear Brake Shimano MT500 hydraulic disc, 160mm RT54 rotor Brake Levers Shimano MT500 hydraulic disc Front Derailleur N/A Rear Derailleur SRAM SX Eagle Shift Levers SRAM SX Eagle, 12-speed Cassette SRAM PG-1230, NX Eagle, 11-50, 12-speed Crankset Truvativ Stylo 6K DUB, 34T, Ai offset Chain SRAM SX Eagle, 12-speed Front wheel Shimano Deore 15x110 hub / Stan's NoTubes Crest S1, 32h, tubeless-ready rim / stainless steel, 14g spokes Rear wheel Shimano Deore, 12x148 hub / Stan's NoTubes Crest S1, 32h, tubeless-ready rim / stainless steel, 14g spokes Front Tyre Maxxis Ardent Race, 29 x 2.35", EXO Protection, tubeless-ready clincher Rear Tyre Maxxis Recon Race, 29 x 2.25", EXO Protection, tubeless-ready clincher Saddle Fabric Scoop Radius Sport, steel rails Seatpost Cannondale DownLow Dropper, internal routing, 31.6, 125mm (M-L), 150mm (XL)...

Bicycle RoadBike MuntainBike 

1591 EUR

Nairobi
Kenya

12.07.2021

Other Ads that may also interest you More similar ads

2021 Specialized S-Works Tarmac SL7 RED eTap AXS 12-Speed Disc Road Bike (WORLD RACYCLES)
2021 Specialized S-Works Tarmac SL7 RED eTap AXS 12-Speed Disc Road Bike (WORLD RACYCLES)

Buy 2021 Specialized S-Works Tarmac SL7 RED eTap AXS 12-Speed Disc Road Bike from World Racycles is 100% safe, Because purchase products at World Racycles provide a 100% money back guarantee. Location World Racycles : Jl. Merak No. 48B. Medan. Contact us : order@worldracycles.com, To purchase online visit the website : worldracycles.com Price : USD 7,000.00 Min Order : 1 - 5 Pcs Lead Time : 6 - 9 Days Port : CIF / Kualanamu International Airport Terms : T/T, Western Union, Paypal Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock SPECIFICATIONS: Frame: Specialized S-Works Tarmac SL7 FACT 12r Carbon, Rider-First Engineered™, Win Tunnel Engineered, Clean Routing, Threaded BB, 12x142mm thru-axle, flat-mount disc Fork: Specialized S-Works FACT Carbon, 12x100mm thru-axle, flat-mount disc Bottom Bracket: SRAM DUB BSA 68 Stem: Specialized Tarmac integrated stem, 6-degree Handlebar: Specialized S-Works Aerofly II Bar Tape: Supacaz Super Sticky Kush Front Brake: SRAM RED eTap AXS hydraulic disc Rear Brake: SRAM RED eTap AXS hydraulic disc Brake Levers: SRAM RED HRD Front Derailleur: SRAM RED eTap AXS, braze-on Rear Derailleur: SRAM RED eTap AXS, 12-speed Shift Levers: SRAM RED eTap AXS HRD, 12-speed Chain: SRAM RED, 12-speed Cassette: SRAM RED XG-1290, 12-speed, 10-33t Crankset: SRAM RED AXS 48/35 with Quarq power meter Front Wheel: Roval Rapide CLX, 21mm internal width carbon rim, 51mm depth, Win Tunnel Engineered, Roval AFD hub, 18 DT Swiss Aerolite spokes Rear Wheel: Roval Rapide CLX, 21mm internal width carbon rim, 60mm depth, Win Tunnel Engineered, Roval AFD hub, 24 DT Swiss Aerolite spokes Front Tyre: Specialized S-Works Turbo Cotton, 320 TPI, 700x26mm, clincher Rear Tyre: Specialized S-Works Turbo Cotton, 320 TPI, 700x26mm, clincher Saddle: Specialized Body Geometry S-Works Power, carbon fibre rails, carbon fibre base Seatpost: Specialized 2021 S-Works Tarmac, FACT Carbon, Di2 compatible, 20mm offset Pedals: Available to purchase separately ...

Bicycles RoadBikes MountainBikes 

6036 EUR

Nairobi
Kenya

13.10.2021

2021 Specialized S-Works Tarmac SL7 RED eTap AXS 12-Speed Disc Road Bike (WORLD RACYCLES)
2021 Specialized S-Works Tarmac SL7 RED eTap AXS 12-Speed Disc Road Bike (WORLD RACYCLES)

Buy 2021 Specialized S-Works Tarmac SL7 RED eTap AXS 12-Speed Disc Road Bike from World Racycles is 100% safe, Because purchase products at World Racycles provide a 100% money back guarantee. Location World Racycles : Jl. Merak No. 48B. Medan. Contact us : order@worldracycles.com, To purchase online visit the website : worldracycles.com Price : USD 7,000.00 Min Order : 1 - 5 Pcs Lead Time : 6 - 9 Days Port : CIF / Kualanamu International Airport Terms : T/T, Western Union, Paypal Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock SPECIFICATIONS: Frame: Specialized S-Works Tarmac SL7 FACT 12r Carbon, Rider-First Engineered™, Win Tunnel Engineered, Clean Routing, Threaded BB, 12x142mm thru-axle, flat-mount disc Fork: Specialized S-Works FACT Carbon, 12x100mm thru-axle, flat-mount disc Bottom Bracket: SRAM DUB BSA 68 Stem: Specialized Tarmac integrated stem, 6-degree Handlebar: Specialized S-Works Aerofly II Bar Tape: Supacaz Super Sticky Kush Front Brake: SRAM RED eTap AXS hydraulic disc Rear Brake: SRAM RED eTap AXS hydraulic disc Brake Levers: SRAM RED HRD Front Derailleur: SRAM RED eTap AXS, braze-on Rear Derailleur: SRAM RED eTap AXS, 12-speed Shift Levers: SRAM RED eTap AXS HRD, 12-speed Chain: SRAM RED, 12-speed Cassette: SRAM RED XG-1290, 12-speed, 10-33t Crankset: SRAM RED AXS 48/35 with Quarq power meter Front Wheel: Roval Rapide CLX, 21mm internal width carbon rim, 51mm depth, Win Tunnel Engineered, Roval AFD hub, 18 DT Swiss Aerolite spokes Rear Wheel: Roval Rapide CLX, 21mm internal width carbon rim, 60mm depth, Win Tunnel Engineered, Roval AFD hub, 24 DT Swiss Aerolite spokes Front Tyre: Specialized S-Works Turbo Cotton, 320 TPI, 700x26mm, clincher Rear Tyre: Specialized S-Works Turbo Cotton, 320 TPI, 700x26mm, clincher Saddle: Specialized Body Geometry S-Works Power, carbon fibre rails, carbon fibre base Seatpost: Specialized 2021 S-Works Tarmac, FACT Carbon, Di2 compatible, 20mm offset Pedals: Available to purchase separately ...

Bicycles RoadBikes MountainBikes 

6,036 EUR

Nairobi
Kenya

13.10.2021

CR-10 3D Printer All Metal Frame
CR-10 3D Printer All Metal Frame

EXTRA LARGE: This printer comes with one of the largest build spaces available. At 12inx12inx15.5in, you can print models that 90% of other printers could not. The unique Bowden extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints. OPEN SOURCE: In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all. HIGH QUALITY: This all aluminum frame provides a sturdy base meant to last for years. The POM engineering thermo-plastic “Triangle-Slot” wheels provide excellent dimensional stability even during extended use. Elimination of metal-on-metal steel rods cuts noise down dramatically. GLASS BED: This printer comes stock with a reliable and flat glass bed. Forget about other printers with uneven printing surfaces and warped beds. This glass bed ensures a 100% usable and flat surface for any print from the smallest test file to the largest model. An absolute necessity when dealing with such a large build space, print from corner to corner and get perfect layer lines every time. WARRANTY: Our experienced 3D printing engineers are available 24/7 to offer you lifetime technical support as well as our 1-Year limited manufacturers replacement part. If you are not satisfied with the results of your prints, contact us and we will work with you to provide assistance until you are printing like a pro! OFFICIAL CREALITY: Our experienced 3D printing engineers are available 24/7 to offer you lifetime technical support as well as our 1-Year limited manufacturers replacement part. If you are not satisfied with the results of your prints, contact us and we will work with you to provide assistance until you are printing like a pro! ...

printer machine canon 

664 EUR

Nairobi
Kenya

03.09.2021