List of ads matching your search

ZIPP 808 FIRECREST TRACK TUBULAR FRONT WHEEL
ZIPP 808 FIRECREST TRACK TUBULAR FRONT WHEEL

Zipp 808 Firecrest Track Tubulars are probably the fastest practical choice for the banked oval. Double discs on the track might be faster, but they’re harder to control, and much heavier. The 808 Firecrest Tubular rim you see here is the same as you’ll find on the road. The great thing about the 808s is they handle like much shallower wheels. The Firecrest shape is the secret. The blunt end and flattish profile not only reduce low pressure zones on the leeward side of the wheels, but through smart tuning, Zipp was able to move the focal point back, so that steering would be easier-which means less attention needs to be paid to riding fast and less arm strength needs to be used to hold the wheels in the direction you want them to go. The rim depth is 82mm deep with a max width of 27.5mm. The cross-section looks very much like a super-long U, with a blunt edge on the spoke side. And, with a tire installed, the leading and trailing edges seem nearly identical. This overall shape, and further enhanced by the ABLC dimple pattern means that even though the wheel appears very deep when slicing through a pure headwind (zero yaw), it appears relatively shallow when getting hit by a crosswind (higher yaw angles), which happens twice a lap on a tack. The result is that the wind almost sees the 808’s as disc wheels when you’re going straight, and sees 404’s or shallower when you go through the turns. Not only does this mean added speed overall, but it also means less arm strength and less focus to pilot the bike exactly where you want it to go. And accelerating wheels that weigh only 1805g per set is easier, all things being equal, than most of the commercially-available track hoops. Cool note: The exposed spoke nipples, which are liked because you can true the wheel without special tools and with the tire still glued on, are totally hidden from the wind when the tire is the leading edge. Those spokes are the fastest available, Sapim CX-Ray, which are thin blades capable of holding high spoke tension. Twenty radial spokes in front and 24 two-cross in back. The spokes are J-bends are laced to Zipp’s 333 track hub. The name is for a standard track length. The shells are made of 7075 aluminum alloy and feature solid flanges for stiffness and strength. Axles are 15mm in diameter and made from stainless steel. The axles run on sealed cartridge bearings, which are easy to service thanks to the wide wrench flats. Likewise, the axle nuts are tightened by a 6mm Allen key The rear hub has a larger drive-side flange. This allows Zipp to achieve equal tension on both the drive- and non-drive-side spokes, making the wheel stronger and stiffer. Weights are low, with the front weighing in at 215g and the rear 270g. The wheel is delivered with a Zipp valve extender designed to thread into valve stems that are at least 37mm long and feature a removable valve core. The Zipp 808 improves any bike its on. It can be paired with an 808, or with a shallower wheel in the front or a deeper wheel in the back, depending on your strengths, how you ride, and the conditions you ride in. There’s a slight chance that the 808 rear won’t fit between super-narrow chainstays found on some pursuit bikes. Check first. The Zipp 808 Firecrest Track Tubular is like having climbing wheels that outperform discs....

Bicycle Frame Wheel 

560 EUR

Nairobi
Kenya

19.07.2021
New

storm 3axis mini desktop red and silver cnc 3018 pcb cnc engraving machine
storm 3axis mini desktop red and silver cnc 3018 pcb cnc engraving machine

Quick Details Condition: New Positioning Accuracy (mm): 0.01 mm No. of Spindles: Single Working Table Size(mm): 300×400 Machine Type: CNC Router Travel (X Axis)(mm): 300 mm Travel (Y Axis)(mm): 180 mm Repeatability (X/Y/Z) (mm): 0.01 mm CNC or Not: CNC Place of Origin: Zhejiang, China Brand Name: CECLE Voltage: 220V Dimension(L*W*H): 400*330*240mm Certification: CE Weight (KG): 8 Warranty: 1 Year Key Selling Points: Easy to Operate Local Service Location: None After Warranty Service: Online support, Spare parts Showroom Location: None Applicable Industries: Building Material Shops, Machinery Repair Shops, Manufacturing Plant, Home Use, Retail, Printing Shops, Construction works , Advertising Company Marketing Type: Hot Product 2019 Machinery Test Report: Provided Video outgoing-inspection: Provided Warranty of core components: 1 Year Core Components: Bearing, Motor, Pump, Gear, Pressure vessel, Engine, Gearbox After-sales Service Provided: Engineers available to service machinery overseas Working area: 300*180*40mm Power supply: 24 V (110 V-240 V) Engraving speed: 1000rpm/min Operating system: Windows XP/victoria 7/Win 8/Linux Suitable: Complete set of parts(not include laser head) and installation tools Color: Silver/Red Laser (optional): 500 MW / 2500 MW/5500 MW (12 V ) Weight: 8kg Power(W): 80w Model CNC3018 Machine size 400*330*240 mm(excluding motor protruding parts) Working range 300*180*40 mm Power 80W Use software GRBL control Material Aluminum + plastic Spindle 775spindle motor(12-36V) 24V:7000r / min,36V:9000r / min Stepping motor 1.3A 0.25N.m Screw T8 screw Power supply 24V 5.6A (110V -240V) Operating System Windows XP / Win 7 / Win 8 / Linux Applicable material Plastic, wood, acrylic, pvc, pcb and other soft materials Suitable Complete set of parts (not include laser head)and installation tools Colour Silver / Red Laser (optional) 500 MW / 2500 MW / 5500 MW (12 V )...

Digital Printing 

446 EUR

Mbabane
Swaziland

11.07.2021
New

HP DESIGNJET T1530 36IN POSTSCRIPT PRINTER
HP DESIGNJET T1530 36IN POSTSCRIPT PRINTER

Item: L2Y24A Printing Method Printing Technology HP Thermal Inkjet Maximum Resolution Up to 2400 x 1200 optimized dpi Print Speed Print Time Line Drawing: 21 sec/page on A1/D (economode) Print Speed Line Drawing: 120 A1/D prints per hour (economode) Ink Type Dye Based: C, G, M, Pk, y Pigment Based: mK Ink Droplet Size 6 pL (C, M, Y, G, pK) 9 pL (mK) Ink Cartridge Configuration 6 Cartridges: cyan, gray, magenta, matte black, photo black, yellow Ink Cartridge Capacity 130 or 300 mL Margins Top x Bottom x Left x Right: Roll: 0.12 x 0.12 x 0.12 x 0.12″ (3 x 3 x 3 x 3 mm) Sheet: 0.12 x 0.87 x 0.12 x 0.12″ (3 x 22 x 3 x 3 mm) Line Accuracy ±0.1% Printhead C, G, M, mK, pK, Y Minimum Line Width 0.79 mil (0.02 mm) (HP-GL/2 addressable) Guaranteed Minimum Line Width 2.8 mil (0.07 mm) (ISO/IEC 13660:2001(E)) Maximum Optical Density Black: 2.15 D (6 L* min) Applications Line drawings, Renderings, Presentations Memory 96 GB (file processing) Hard Disk 500 GB Media Types & Handling Paper Handling Input: two automatic front-loading roll feeds, smart roll switching, sheet feed Output: integrated output stacking tray (from A4/A to AO/E, with up to 50 A1/D-size capacity), media bin, automatic cutter Paper Types Bond and coated paper (bond, coated, heavyweight coated, super heavyweight plus matte, colored), technical paper (natural tracing, translucent bond, vellum), film (clear, matte, polyester), photographic paper (satin, gloss, semi-gloss, matte, high-gloss), backlit, self-adhesive (two-view cling, indoor paper, polypropylene, vinyl) Media Sizes Standard: Rolls: 11 to 36″ (27.9 to 91.4 cm) Sheets: 8.3 x 11 to 36 x 48″ (21 x 27.9 to 91.4 x 121.9 cm) Standard sheets: A4, A3, A2, A1, A0 (A, B, C, D, E)Custom: 8.3 x 11 to 36 x 48″ (21 x 27.9 to 91.4 x 121.9 cm) Roll External Diameter: 5.5″ (14 cm) Media Thickness Up to 19.7 mil (0.5 mm) Connectivity Interfaces Standard: Gigabit Ethernet (1000Base-T) Hi-Speed USB 2.0 Printer Language Postscript Printer: Adobe PostScript 3, Adobe PDF 1.7 Extension Level 3, HP-GL/2, HP-RTL, TIFF, JPEG, CALS G4, HP-PCL3GUI, URF Basic Printer: HP-GL/2, HP-RTL, TIFF, JPEG, CALS G4, HP-PCL3GUI, URF Printing Paths Direct printing from USB flash drive, email printing, HP driver for Windows, HP driver for Mac OS X, HP Print Service for Android, Apple AirPrint driver Drivers Included: HP-GL/2, HP-PCL3GUI drivers for Windows and Mac OS X; PostScript drivers for Windows, Linux, and Mac OS X Physical Temperature Operating: 41 to 104°F (5 to 40°C) Storage: -13 to 131°F (-25 to 55°C) Operating Humidity 20 to 80% RH Acoustic Noise Sound Pressure: 47 dB(A) (printing); 39 dB(A) (ready); Sound Power: 6.5 B(A) (printing); 5.8 B(A) (ready); Power Consumption Printing: 120 W Sleep: 1.3 W (5 W with embedded Digital Front End) Input Voltage Auto Ranging: 100 to 240 VAC (±10%), 50/60 Hz (±3 Hz) Input Current 2 A maximum Certifications Safety USA and Canada (CSA certified), EU (LVD and EN 60950-1 compliant), Russia (GOST), Singapore (PSB), China (CCC), Argentina (IRAM), Mexico (NYCE), Korea (KATS)Electromagnetic Compliant with Class A requirements, including: USA (FCC rules), Canada (ICES), EU (EMC Directive), Australia (ACMA), New Zealand (RSM), China (CCC), Japan (VCCI); Certified as Class A product: Korea (KCC) Environmental ENERGY STAR, WEEE, EU RoHS, China RoHS, REACH, EPEAT Bronze Dimensions (WxDxH) 55.1 x 36.1 x 43.7″ (139.9 x 91.6 x 111 cm) Weight 194 lb (88 kg)...

Digital Printing 

2944 EUR

Mbabane
Swaziland

11.07.2021
New

HP DESIGNJET T730 36IN PRINTER
HP DESIGNJET T730 36IN PRINTER

Printing Method Printing Technology HP Thermal Inkjet Size 36″ (91.4 cm) Maximum Resolution Up to 2400 x 1200 optimized dpi Print Speed Print Time Line Drawing: 25 sec/page on A1/D (economode) Print Speed Line Drawing: 82 A1/D prints per hour (economode) Ink Droplet Size 6 pL (C, M, Y); 12.6 pL (mK) Ink Type Dye-based (C, M, Y); pigment-based (mK) Ink Cartridge Configuration 4 individual ink cartridges (cyan, magenta, yellow, black) Ink Cartridge Capacity 40 to 300 mL Line Accuracy ± 0.1% Printhead C, M, Y, mK Minimum Line Width 0.8 mil (0.02 mm) (HP-GL/2 addressable) Guaranteed Minimum Line Width 2.8 mil (0.07 mm) (ISO/IEC 13660:2001(E)) Maximum Optical Density Black: 2.10 D (8 L* min) Applications Line drawings, Renderings, Presentations Memory 1 GB Media Types & Handling Paper Handling Sheet feed, roll feed, input tray, media bin, automatic cutter Paper Types Bond and coated paper (bond, coated, heavyweight coated, recycled, plain, bright white), technical paper (natural tracing, vellum), film (clear, matte), photographic paper (satin, gloss, semigloss, premium, polypropylene), self-adhesive (adhesive, polypropylene) Media Sizes Standard: Rolls: 11 to 36″ (27.9 to 91.4 cm) Sheets: 8.3 x 11 to 36 x 74.7″ (21 x 27.9 to 91.4 x 189.7 cm) Standard sheets: A4, A3, A2, A1, A0 (A, B, C, D, E)Custom: Input Tray: 8.3 x 11 to 13 x 19″ (21 x 27.9 to 33 x 48.3 cm) Manual Feed: 13 x 19 to 36 x 74.7″ (33 x 48.3 to 91.4 x 189.7 cm) Roll: 11 to 36″ (27.9 to 91.4 cm) Roll External Diameter: 3.9″ (9.9 cm) Media Thickness Up to 11.8 mil (0.3 mm) Connectivity Interfaces Gigabit Ethernet (1000Base-T) Wi-Fi Hi-Speed USB 2.0 Printer Language HP-GL/2, HP-RTL, TIFF, JPEG, CALS G4, HP PCL 3 GUI, URF Printing Paths Printer driver, email printing, Apple AirPrint, Android Print Service, print from USB Mobile Printing Features Wi-Fi Direct and local Wi-Fi connectivity to enable mobile printing via HP ePrint, Apple AirPrint and HP All-in-One printer remote App Supports printing from most smartphones and tablets using Android and iOS operating systems Drivers HP-GL/2, HP-RTL drivers for Windows; HP PCL 3 GUI driver for Mac OS X and Windows Physical Temperature Operating: 41 to 104°F (5 to 40°C) Storage: -13 to 131°F (-25 to 55°C) Operating Humidity 20 to 80% RH Acoustic Noise Sound Pressure: 48 dB(A) (printing); Sound Power: 6.5 B(A) (printing); Power Consumption Printing: 35 W Sleep: 3.5 W Standby: 0.2 W Input Voltage Auto Ranging: 100 to 240 VAC (±10%), 50/60 Hz (±3 Hz), 1.2 A maximum Dimensions (WxDxH) 55.2 x 23 x 45.5″ (140.3 x 58.3 x 115.5 cm) Weight 105.8 lb (48 kg)...

Digital Printing 

5498 EUR

Mbabane
Swaziland

11.07.2021
New